diff --git a/LuaLibs/BeamLib.lua b/LuaLibs/BeamLib.lua
index 36d8dad..5525af3 100644
--- a/LuaLibs/BeamLib.lua
+++ b/LuaLibs/BeamLib.lua
@@ -803,7 +803,7 @@ function BeamLib.CalcLeadInOutTangGeom( ptP1, ptP2, vtN, dRad, vtRef, dCutExtra,
 end
 
 ---------------------------------------------------------------------
-function BeamLib.MakeOneFaceBySaw( nSurfId, nFacet, sCutting, dSawDiam, Par5, dVzLimDwnUp, dCutExtra, dCutSic, dCutOffset, dAccStart, sNotes, b3Raw)
+function BeamLib.MakeOneFaceBySaw( nSurfId, nFacet, sCutting, dSawDiam, Par5, dVzLimDwnUp, dCutExtra, dCutSic, dCutOffset, dAccStart, dAccEnd, sNotes, b3Raw)
    -- dati della faccia
    local ptC, vtN = EgtSurfTmFacetCenter( nSurfId, nFacet, GDB_ID.ROOT)
    -- risolvo parametro ambiguo
@@ -945,7 +945,7 @@ function BeamLib.MakeOneFaceBySaw( nSurfId, nFacet, sCutting, dSawDiam, Par5, dV
    EgtSetMachiningParam( MCH_MP.LOPERP, dLoPerp)
    -- imposto allungamenti iniziale e finale
    EgtSetMachiningParam( MCH_MP.STARTADDLEN, dAllStart - dAccStart)
-   EgtSetMachiningParam( MCH_MP.ENDADDLEN, dAllEnd)
+   EgtSetMachiningParam( MCH_MP.ENDADDLEN, dAllEnd - dAccEnd)
    -- eventuali note
    if sNotes and #sNotes > 0 then EgtSetMachiningParam( MCH_MP.USERNOTES, sNotes) end
    -- eseguo
diff --git a/LuaLibs/FacesBySaw.lua b/LuaLibs/FacesBySaw.lua
index 325e376..75182c3 100644
--- a/LuaLibs/FacesBySaw.lua
+++ b/LuaLibs/FacesBySaw.lua
@@ -1,4 +1,4 @@
--- FacesBySaw.lua by Egaltech s.r.l. 2020/11/13
+-- FacesBySaw.lua by Egaltech s.r.l. 2021/06/15
 -- Gestione taglio con lama di feature con una, due o tre facce
 
 -- Tabella per definizione modulo
@@ -126,7 +126,12 @@ function FacesBySaw.MakeTwo( Proc, nPhase, nRawId, nPartId, dOvmHead, sCutType,
          local vtOrthO = EgtIf( ( i % 2) == 1, vtRef[nOtInd], vtRef[nUpInd])
          -- lavoro la faccia
          for j = 1, #vCuts[i] do
-            local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthO, nil, dCutExtra, BD.CUT_SIC, 0, 0, nil, b3Raw)
+            -- se FAST, pezzo alto e ultimo taglio verticale -> allungo uscita per consentire eventuale rotazione B sul posto
+            local dAccEnd = 0
+            if not BD.C_SIMM and BD.MAX_HEIGHT_ROT_B_ABOVE and b3Raw:getDimZ() > BD.MAX_HEIGHT_ROT_B_ABOVE and vtOrthO:getZ() > 0.866 and j == #vCuts[i] then
+               dAccEnd = - ( dSawDiam / 2 + BD.CUT_SIC)
+            end
+            local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthO, nil, dCutExtra, BD.CUT_SIC, 0, 0, dAccEnd, nil, b3Raw)
             if not bOk then
                return bOk, sErr
             end
@@ -140,10 +145,10 @@ function FacesBySaw.MakeTwo( Proc, nPhase, nRawId, nPartId, dOvmHead, sCutType,
          nUpInd, nOtInd = nOtInd, nUpInd
       end
       -- lavoro la prima faccia
-      local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, nOtInd-1, sCutting, dSawDiam, vtRef[nOtInd], nil, dCutExtra, BD.CUT_SIC, 0, 0, nil, b3Raw)
+      local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, nOtInd-1, sCutting, dSawDiam, vtRef[nOtInd], nil, dCutExtra, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
       if not bOk then return bOk, sErr end
       -- lavoro seconda faccia
-      bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, nUpInd-1, sCutting, dSawDiam, vtRef[nUpInd], nil, dCutExtra, BD.CUT_SIC, 0, 0, nil, b3Raw)
+      bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, nUpInd-1, sCutting, dSawDiam, vtRef[nUpInd], nil, dCutExtra, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
       if not bOk then
          return bOk, sErr
       end
diff --git a/LuaLibs/ProcessBlockHausFront.lua b/LuaLibs/ProcessBlockHausFront.lua
index 7421e7a..3d5d8a2 100644
--- a/LuaLibs/ProcessBlockHausFront.lua
+++ b/LuaLibs/ProcessBlockHausFront.lua
@@ -215,7 +215,7 @@ function ProcessBlockHausFront.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
             else
                dExtraTrim = dMiddleExtraTrim
             end
-            local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO, nil, -(dTrim+dExtraTrim), BD.CUT_SIC, 0, 0, nil, b3Raw)
+            local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO, nil, -(dTrim+dExtraTrim), BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
             if not bOk then
                return bOk, sErr
             end
@@ -254,7 +254,7 @@ function ProcessBlockHausFront.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
       if vFaceOrd[2] ~= 0 then
          -- inserisco la lavorazione
          local nOrthoOpposite = BL.GetNearestOrthoOpposite( vtRef)
-         local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[2] - 1, sCutting, dSawDiam, nOrthoOpposite, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[2] - 1, sCutting, dSawDiam, nOrthoOpposite, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sNameOrErr end
          if #sNameOrErr > 0 then bIntCut = true end
       end
@@ -270,7 +270,7 @@ function ProcessBlockHausFront.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
             end
          end
          -- inserisco la lavorazione
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtRef2, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtRef2, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sErr end
       end
    end
diff --git a/LuaLibs/ProcessCut.lua b/LuaLibs/ProcessCut.lua
index ac4f1a3..da53021 100644
--- a/LuaLibs/ProcessCut.lua
+++ b/LuaLibs/ProcessCut.lua
@@ -410,7 +410,7 @@ local function MakeFromTop( sCutting, Proc, nPhase, nRawId, nPartId, dOvmHead, b
                      vtNewOrthoO = -vtOrthoO
                      if not BD.C_SIMM then dVzLimDwnUp = -0.707 end
                   end
-                  local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtNewOrthoO, dVzLimDwnUp, BD.CUT_EXTRA_MIN, BD.CUT_SIC, 0, 0, nil, b3Raw)
+                  local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtNewOrthoO, dVzLimDwnUp, BD.CUT_EXTRA_MIN, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
                   if not bOk then
                      return bOk, sErr
                   end
@@ -435,7 +435,7 @@ local function MakeFromTop( sCutting, Proc, nPhase, nRawId, nPartId, dOvmHead, b
                end
                local dVzLimDwnUp = dNzLimDwnUp
                if not BD.C_SIMM and vtN:getZ() > 0.707 then dVzLimDwnUp = -0.708 end
-               local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO, dVzLimDwnUp, dExtraCut, BD.CUT_SIC, 0, 0, nil, b3Raw)
+               local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO, dVzLimDwnUp, dExtraCut, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
                if not bOk then
                   return bOk, sErr
                end
@@ -468,7 +468,7 @@ local function MakeFromTop( sCutting, Proc, nPhase, nRawId, nPartId, dOvmHead, b
          vtOrthoO = EgtIf( vtN:getY() > 0.02, Y_AX(), -Y_AX())
       end
       -- taglio
-      local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting, dSawDiam, vtOrthoO, dNzLimDwnUp, BD.CUT_EXTRA, BD.CUT_SIC, 0, 0, nil, b3Raw)
+      local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting, dSawDiam, vtOrthoO, dNzLimDwnUp, BD.CUT_EXTRA, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
       if not bOk then
          return bOk, sErr
       end
@@ -612,14 +612,14 @@ local function MakeFromDown( sCutting, Proc, nPhase, nRawId, nPartId, dOvmHead)
             end
             -- taglio perpendicolare (limite Vz Down Up messo a -2 per non farlo mai intervenire)
             if vCuts[i][j] then
-               local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO_1, -2, dExtraCut_1, BD.CUT_SIC, 0, 0, nil, b3Raw)
+               local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO_1, -2, dExtraCut_1, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
                if not bOk then
                   return bOk, sErr
                end
             end
             -- taglio parallelo (limite Vz Down Up messo a -2 per non farlo mai intervenire)
             if vCuts[i+1][j] then
-               local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i+1][j], 0, sCutting, dSawDiam, vtOrthoO_2, -2, dExtraCut_2, BD.CUT_SIC, 0, 0, nil, b3Raw)
+               local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i+1][j], 0, sCutting, dSawDiam, vtOrthoO_2, -2, dExtraCut_2, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
                if not bOk then
                   return bOk, sErr
                end
@@ -658,7 +658,7 @@ local function MakeFromDown( sCutting, Proc, nPhase, nRawId, nPartId, dOvmHead)
          end
       end
       -- taglio (limite Vz Down Up messo a -2 per non farlo mai intervenire)
-      local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting, dSawDiam, vtOrthoO, -2, BD.CUT_EXTRA, BD.CUT_SIC, 0, 0, nil, b3Raw)
+      local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting, dSawDiam, vtOrthoO, -2, BD.CUT_EXTRA, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
       if not bOk then
          return bOk, sErr
       end
diff --git a/LuaLibs/ProcessDoubleCut.lua b/LuaLibs/ProcessDoubleCut.lua
index 391d48b..87f5896 100644
--- a/LuaLibs/ProcessDoubleCut.lua
+++ b/LuaLibs/ProcessDoubleCut.lua
@@ -270,7 +270,7 @@ function ProcessDoubleCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
             local nOrthoOpposite = BL.GetNearestOrthoOpposite( vtOrthOpp, vtNorm)
             -- lavoro la faccia
             for j = 1, #vCuts[i] do
-               local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, nOrthoOpposite, EgtIf( bDownHead, -2, nil), 0, BD.CUT_SIC, 0, 0, nil, b3Raw)
+               local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, nOrthoOpposite, EgtIf( bDownHead, -2, nil), 0, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
                if not bOk then
                   return bOk, sErr
                end
diff --git a/LuaLibs/ProcessDovetail.lua b/LuaLibs/ProcessDovetail.lua
index 6176053..8242f87 100644
--- a/LuaLibs/ProcessDovetail.lua
+++ b/LuaLibs/ProcessDovetail.lua
@@ -530,7 +530,7 @@ local function MakeCutsByDice( Proc, b3Raw, vCuts, bHead, vtRef, dFinalExtraTrim
          else
             dExtraTrim = dMiddleExtraTrim
          end
-         local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO, nil, -( dTrim + dExtraTrim), BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO, nil, -( dTrim + dExtraTrim), BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then
             return bOk, sErr
          end
@@ -702,7 +702,7 @@ local function MakeByBlade( Proc, nPhase, nRawId, nPartId, dOvmHead, b3Raw, b3So
          -- calcolo secondo testa o coda
          local vtRef2 = EgtIf( bHead, X_AX(), -X_AX())
          -- inserisco la lavorazione
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtRef2, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtRef2, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sErr end
       end
       -- taglio sulla seconda faccia intermedia
@@ -710,7 +710,7 @@ local function MakeByBlade( Proc, nPhase, nRawId, nPartId, dOvmHead, b3Raw, b3So
          -- calcolo secondo testa o coda
          local vtRef2 = EgtIf( bHead, X_AX(), -X_AX())
          -- inserisco la lavorazione
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[1] - 1, sCutting, dSawDiam, vtRef2, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[1] - 1, sCutting, dSawDiam, vtRef2, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sErr end
       end
    -- se altrimenti non ha fatto una parte dei tagli a cubetti
@@ -720,7 +720,7 @@ local function MakeByBlade( Proc, nPhase, nRawId, nPartId, dOvmHead, b3Raw, b3So
          -- inserisco la lavorazione
          local nDirVect = BL.GetNearestOrthoOpposite( vtRef)
          local bOk, sNameOrErr
-         bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[2] - 1, sCutting, dSawDiam, nDirVect, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, nil, b3Raw)
+         bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[2] - 1, sCutting, dSawDiam, nDirVect, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sNameOrErr end
          if #sNameOrErr > 0 then bIntCut = true end
       end
@@ -736,7 +736,7 @@ local function MakeByBlade( Proc, nPhase, nRawId, nPartId, dOvmHead, b3Raw, b3So
             end
          end
          -- inserisco la lavorazione
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtRef2, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtRef2, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sErr end
       end
    end
@@ -996,7 +996,7 @@ local function MachSideFaces( Proc, nPartId, b3Raw, nFacetCnt, bForceUseRough,
             end
             -- inserisco la lavorazione
             local nOrthoOpposite = BL.GetNearestOrthoOpposite( vtRef)
-            local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, ( i - 1), sCutting, dSawDiam, nOrthoOpposite, nil, -( dTrim + dExtraZed), BD.CUT_SIC, 0, 0, nil, b3Raw)
+            local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, ( i - 1), sCutting, dSawDiam, nOrthoOpposite, nil, -( dTrim + dExtraZed), BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
             if not bOk then return bOk, sNameOrErr end
             bPrevByBlade = true
          end
diff --git a/LuaLibs/ProcessFrenchRidgeLap.lua b/LuaLibs/ProcessFrenchRidgeLap.lua
index 7d81804..a5089d1 100644
--- a/LuaLibs/ProcessFrenchRidgeLap.lua
+++ b/LuaLibs/ProcessFrenchRidgeLap.lua
@@ -176,7 +176,7 @@ function ProcessFrenchRidgeLap.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
             else
                dExtraTrim = dMiddleExtraTrim
             end
-            local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO, nil, -(dTrim+dExtraTrim), BD.CUT_SIC, 0, 0, nil, b3Raw)
+            local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO, nil, -(dTrim+dExtraTrim), BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
             if not bOk then
                return bOk, sErr
             end
@@ -197,7 +197,7 @@ function ProcessFrenchRidgeLap.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
          -- se va fatto, inserisco la lavorazione
          if bCut then
             local vtOrthoO = Vector3d( vtRef)
-            local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[1] - 1, sCutting, dSawDiam, vtOrthoO, nil, BD.CUT_EXTRA, BD.CUT_SIC, 0, 0, nil, b3Raw)
+            local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[1] - 1, sCutting, dSawDiam, vtOrthoO, nil, BD.CUT_EXTRA, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
             if not bOk then return bOk, sNameOrErr end
          end
       end
@@ -217,7 +217,7 @@ function ProcessFrenchRidgeLap.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
          -- se va fatto, inserisco la lavorazione
          if bCut then
             local vtOrthoO = Vector3d( vtRef)
-            local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[1] - 1, sCutting, dSawDiam, vtOrthoO, nil, BD.CUT_EXTRA, BD.CUT_SIC, 0, 0, nil, b3Raw)
+            local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[1] - 1, sCutting, dSawDiam, vtOrthoO, nil, BD.CUT_EXTRA, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
             if not bOk then return bOk, sNameOrErr end
          end
       end
@@ -226,7 +226,7 @@ function ProcessFrenchRidgeLap.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
       if vFaceOrd[2] ~= 0 then
          -- inserisco la lavorazione
          local nOrthoOpposite = BL.GetNearestOrthoOpposite( vtRef)
-         local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[2] - 1, sCutting, dSawDiam, nOrthoOpposite, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[2] - 1, sCutting, dSawDiam, nOrthoOpposite, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sNameOrErr end
          if #sNameOrErr > 0 then bIntCut = true end
       end
@@ -242,7 +242,7 @@ function ProcessFrenchRidgeLap.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
             end
          end
          -- inserisco la lavorazione
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtRef2, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtRef2, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sErr end
       end
    end
diff --git a/LuaLibs/ProcessHeadCut.lua b/LuaLibs/ProcessHeadCut.lua
index 6f50bf6..dd57ce1 100644
--- a/LuaLibs/ProcessHeadCut.lua
+++ b/LuaLibs/ProcessHeadCut.lua
@@ -202,14 +202,14 @@ function ProcessHeadCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bNeedHCut
       if bDoubleCut then
          for i = nCuts, 1, -1 do
             local dCutOffset = ( i - 1) * dOffsL
-            local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting, dSawDiam, MCH_MILL_FU.ORTHO_BACK, nil, dCutExtra, BD.CUT_SIC, dCutOffset, dAccStart, '', b3Raw)
+            local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting, dSawDiam, MCH_MILL_FU.ORTHO_BACK, nil, dCutExtra, BD.CUT_SIC, dCutOffset, dAccStart, 0, '', b3Raw)
             if not bOk then return false, sErr end
          end
       end
       -- eseguo i tagli necessari
       for i = nCuts, 1, -1 do
          local dCutOffset = ( i - 1) * dOffsL
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting, dSawDiam, nOrthoOpposite, nil, dCutExtra, BD.CUT_SIC, dCutOffset, dAccStart, '', b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting, dSawDiam, nOrthoOpposite, nil, dCutExtra, BD.CUT_SIC, dCutOffset, dAccStart, 0, '', b3Raw)
          if not bOk then return false, sErr end
       end
    -- altrimenti necessari tagli da sopra e sotto con testa opportuna
@@ -252,13 +252,13 @@ function ProcessHeadCut.Make( Proc, nPhase, nRawId, nPartId, dOvmHead, bNeedHCut
       -- eseguo i tagli da sotto necessari
       for i = nCuts, 1, -1 do
          local dCutOffset = ( i - 1) * dOffsL
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting2, dSawDiam2, MCH_MILL_FU.ORTHO_TOP, nil, dCutExtra2, BD.CUT_SIC, dCutOffset, dAccStart, '', b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting2, dSawDiam2, MCH_MILL_FU.ORTHO_TOP, nil, dCutExtra2, BD.CUT_SIC, dCutOffset, dAccStart, 0, '', b3Raw)
          if not bOk then return false, sErr end
       end
       -- eseguo i tagli da sopra necessari
       for i = nCuts, 1, -1 do
          local dCutOffset = ( i - 1) * dOffsL
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting, dSawDiam, MCH_MILL_FU.ORTHO_DOWN, nil, dCutExtra, BD.CUT_SIC, dCutOffset, dAccStart, '', b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting, dSawDiam, MCH_MILL_FU.ORTHO_DOWN, nil, dCutExtra, BD.CUT_SIC, dCutOffset, dAccStart, 0, '', b3Raw)
          if not bOk then return false, sErr end
       end
    end
diff --git a/LuaLibs/ProcessLapJoint.lua b/LuaLibs/ProcessLapJoint.lua
index 63343af..8088050 100644
--- a/LuaLibs/ProcessLapJoint.lua
+++ b/LuaLibs/ProcessLapJoint.lua
@@ -2106,7 +2106,7 @@ local function MakeByChainOrSaw( Proc, nPhase, nRawId, nPartId, nFacInd,
       end
       for i = 1, nStep do
          local dOffs = ( i - 1) * dStep
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, nFacAdj, sCutting, dSawDiam, nFaceUse, -0.01, 0, BD.CUT_SIC, dOffs, 0, nil, b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, nFacAdj, sCutting, dSawDiam, nFaceUse, -0.01, 0, BD.CUT_SIC, dOffs, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sErr end
       end
       -- in base all'elevazione calcolo l'impronta della lama
@@ -2348,7 +2348,7 @@ local function MakeAntiSplintBySaw( Proc, nFacet, vtN, b3Raw)
       end
    end
    -- eseguo il taglio
-   local bMadeASbyBld, sWarn, nIdMach = BL.MakeOneFaceBySaw( Proc.Id, nFacet, sCutting, dSawDiam, vtN, nil, -0.5, BD.CUT_SIC, 0, 0, nil, b3Raw)
+   local bMadeASbyBld, sWarn, nIdMach = BL.MakeOneFaceBySaw( Proc.Id, nFacet, sCutting, dSawDiam, vtN, nil, -0.5, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
    return bMadeASbyBld, sWarn, nIdMach, dSawThick
 end
 
diff --git a/LuaLibs/ProcessProfCamb.lua b/LuaLibs/ProcessProfCamb.lua
index 5b394fa..e98586f 100644
--- a/LuaLibs/ProcessProfCamb.lua
+++ b/LuaLibs/ProcessProfCamb.lua
@@ -313,7 +313,7 @@ function ProcessProfCamb.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
             end
          end
          local vtOrthoO = Vector3d(vtN)
-         local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, nLastFacet, sCutting, dToolDiam, vtOrthoO, nil, -((dMillDiam/2)+1), BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, nLastFacet, sCutting, dToolDiam, vtOrthoO, nil, -((dMillDiam/2)+1), BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
       end
    end
    -- se devo inserire il chamfer
diff --git a/LuaLibs/ProcessRidgeLap.lua b/LuaLibs/ProcessRidgeLap.lua
index 3e36933..9b1b945 100644
--- a/LuaLibs/ProcessRidgeLap.lua
+++ b/LuaLibs/ProcessRidgeLap.lua
@@ -1,4 +1,4 @@
--- ProcessRidgeLap.lua by Egaltech s.r.l. 2020/04/23
+-- ProcessRidgeLap.lua by Egaltech s.r.l. 2021/06/15
 -- Gestione calcolo mezzolegno di testa per Travi
 
 -- Tabella per definizione modulo
@@ -7,6 +7,7 @@ local ProcessRidgeLap = {}
 -- Include
 require( 'EgtBase')
 local BL = require( 'BeamLib')
+local Cut = require( 'ProcessCut')
 local DC = require( 'DiceCut')
 
 EgtOutLog( ' ProcessRidgeLap started', 1)
@@ -97,28 +98,34 @@ function ProcessRidgeLap.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
    end
    -- recupero i dati dell'utensile
    local dSawDiam = 400
+   local dMaxDepth = 0
    if EgtMdbSetCurrMachining( sCutting) then
       local sTuuid = EgtMdbGetCurrMachiningParam( MCH_MP.TUUID)
       if EgtTdbSetCurrTool( EgtTdbGetToolFromUUID( sTuuid) or '') then
          dSawDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM) or dSawDiam
+         dMaxDepth = EgtTdbGetCurrToolMaxDepth() or dMaxDepth
       end
    end
+   local dMaxVertDepth = dMaxDepth - ( BD.DECR_VERT_CUT or 0)
    -- taglio sulla faccia esterna
    if vFaceOrd[1] ~= 0 then
-      -- in generale va fatto
-      local bCut = true
-      -- se di testa e coincide con inizio grezzo, non va fatto
-      if bHead and AreSameVectorApprox( vtN[vFaceOrd[1]], X_AX()) and abs( ptC[vFaceOrd[1]]:getX() - b3Raw:getMax():getX() + dOvmHead) < 10 * GEO.EPS_SMALL then
-         bCut = false
+      -- recupero gruppo per geometria addizionale
+      local nAddGrpId = BL.GetAddGroup( nPartId)
+      if not nAddGrpId then
+         local sErr = 'Error : missing AddGroup'
+         EgtOutLog( sErr)
+         return false, sErr
       end
-      -- se di coda e coincide con taglio di separazione, non va fatto
-      if not bHead and AreSameVectorApprox( vtN[vFaceOrd[1]], - X_AX())  and  abs( ptC[vFaceOrd[1]]:getX() - b3Raw:getMin():getX()) < BD.OVM_MID + 10 * GEO.EPS_SMALL then
-         bCut = false
-      end
-      -- se va fatto, inserisco la lavorazione
-      if bCut then
-         local nOrthoOpposite = BL.GetNearestOrthoOpposite( vtN[vFaceOrd[3]])
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[1] - 1, sCutting, dSawDiam, nOrthoOpposite, nil, BD.CUT_EXTRA, BD.CUT_SIC, 0, 0, nil, b3Raw)
+      -- creo piano di taglio sulla faccia esterna e lo lavoro
+      local AddId = EgtSurfTmPlaneInBBox( nAddGrpId, ptC[vFaceOrd[1]], vtN[vFaceOrd[1]], b3Solid, GDB_RT.GLOB)
+      if AddId then
+         EgtSetName( AddId, 'AddCut_' .. tostring( Proc.Id))
+         EgtSetInfo( AddId, 'TASKID', Proc.TaskId)
+         -- applico taglio di lama
+         local b3Cut = EgtGetBBoxGlob( AddId or GDB_ID.NULL, GDB_BB.STANDARD)
+         local CutProc = { Id = AddId, Grp = Proc.Grp, Prc = Proc.Prc, Box = b3Cut, Fct = 1, Flg = Proc.Flg,
+                           Head = Proc.Head, Tail = Proc.Tail, CutId = Proc.CutId, TaskId = Proc.TaskId}
+         local bOk, sErr = Cut.Make( CutProc, nPhase, nRawId, nPartId, dOvmHead, false)
          if not bOk then return bOk, sErr end
       end
    end
@@ -156,7 +163,7 @@ function ProcessRidgeLap.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
          end
          -- lavoro la faccia
          for j = 1, #vCuts[i] do
-            local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, nOrthoOpposite, nil, 0, BD.CUT_SIC, 0, 0, nil, b3Raw)
+            local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, nOrthoOpposite, nil, 0, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
             if not bOk then
                return bOk, sErr
             end
@@ -167,14 +174,14 @@ function ProcessRidgeLap.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
       if vFaceOrd[2] ~= 0 then
          -- inserisco la lavorazione
          local nOrthoOpposite = BL.GetNearestOrthoOpposite( vtN[vFaceOrd[3]])
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[2] - 1, sCutting, dSawDiam, nOrthoOpposite, nil, 0, BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[2] - 1, sCutting, dSawDiam, nOrthoOpposite, nil, 0, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sErr end
       end
       -- taglio sulla faccia intermedia
       if vFaceOrd[3] ~= 0 then
          -- inserisco la lavorazione
          local nOrthoOpposite = BL.GetNearestOrthoOpposite( EgtIf( bHead, X_AX(), -X_AX()))
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, nOrthoOpposite, nil, 0, BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, nOrthoOpposite, nil, 0, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sErr end
       end
    end
diff --git a/LuaLibs/ProcessScarfJoint.lua b/LuaLibs/ProcessScarfJoint.lua
index 270a690..24e1272 100644
--- a/LuaLibs/ProcessScarfJoint.lua
+++ b/LuaLibs/ProcessScarfJoint.lua
@@ -169,7 +169,7 @@ local function ApplyDiceCut( vFaceOrd, nGoodFace1, nGoodFace4, nAddGrpId, b3Soli
          end
          -- lavoro la faccia
          for j = 1, #vCuts[i] do
-            bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO, nil, 0, BD.CUT_SIC, 0, 0, nil, b3Raw)
+            bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO, nil, 0, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
             if not bOk then return bOk, sErr end
          end
       end
@@ -177,14 +177,14 @@ local function ApplyDiceCut( vFaceOrd, nGoodFace1, nGoodFace4, nAddGrpId, b3Soli
       if vFaceOrd[1] ~= 0 then
          -- inserisco la lavorazione
          local vtOrthoO = Vector3d( vtRef)
-         bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[1] - 1, sCutting, dSawDiam, vtOrthoO, nil, 0, BD.CUT_SIC, 0, 0, nil, b3Raw)
+         bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[1] - 1, sCutting, dSawDiam, vtOrthoO, nil, 0, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sErr end
       end
       -- lavoro la faccia opposta (definita dal parametro P11)
       if vFaceOrd[3] ~= 0 then
          -- inserisco la lavorazione
          local vtOrthoO = Vector3d( vtRef)
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtOrthoO, nil, 0, BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtOrthoO, nil, 0, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sErr end
       end
    end
@@ -348,7 +348,7 @@ function ProcessScarfJoint.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
          if vFaceOrd[1] ~= 0 then
             -- inserisco la lavorazione
             local vtOrthoO = Vector3d( vtRef)
-            bOkd, sErrD = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[1] - 1, sCutting, dSawDiam, vtOrthoO, nil, 0, BD.CUT_SIC, 0, 0, nil, b3Raw)
+            bOkd, sErrD = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[1] - 1, sCutting, dSawDiam, vtOrthoO, nil, 0, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
             if not bOkd then return bOkd, sErrD end
          end
          -- se non ho intersezione con la faccia tappo posso fare il taglio sul fianco
@@ -357,12 +357,12 @@ function ProcessScarfJoint.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
             if vFaceOrd[3] ~= 0 then
                -- inserisco la lavorazione
                local vtOrthoO = Vector3d( vtRef)
-               bOkd, sErrD = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtOrthoO, nil, 0, BD.CUT_SIC, 0, 0, nil, b3Raw)
+               bOkd, sErrD = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtOrthoO, nil, 0, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
                if not bOkd then return bOkd, sErrD end
             end
             -- inserisco la lavorazione
             local vtRef2 = EgtIf( abs(vtRef:getZ()) < GEO.EPS_SMALL, Z_AX(), EgtIf( bHead, Y_AX(), -Y_AX()))
-            bOkd, sErrD = BL.MakeOneFaceBySaw( nFace4, nGoodFace4 - 1, sCutting, dSawDiam, vtRef2, nil, 0, BD.CUT_SIC, 0, 0, nil, b3Raw)
+            bOkd, sErrD = BL.MakeOneFaceBySaw( nFace4, nGoodFace4 - 1, sCutting, dSawDiam, vtRef2, nil, 0, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
             if not bOkd then return bOkd, sErrD end
          else -- altrimenti se ho intersezione forzo il DiceCut ad essere eseguito con distanze più piccole
             -- definisco la nuova dimensione massima del dice cut
@@ -375,14 +375,14 @@ function ProcessScarfJoint.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
          if vFaceOrd[1] ~= 0 then
             -- inserisco la lavorazione
             local vtOrthoO = Vector3d( vtRef)
-            bOkd, sErrD = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[1] - 1, sCutting, dSawDiam, vtOrthoO, nil, 0, BD.CUT_SIC, 0, 0, nil, b3Raw)
+            bOkd, sErrD = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[1] - 1, sCutting, dSawDiam, vtOrthoO, nil, 0, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
             if not bOkd then return bOkd, sErrD end
          end
          -- lavoro la faccia opposta (definita dal parametro P11)
          if vFaceOrd[3] ~= 0 then
             -- inserisco la lavorazione
             local vtOrthoO = Vector3d( vtRef)
-            bOkd, sErrD = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtOrthoO, nil, 0, BD.CUT_SIC, 0, 0, nil, b3Raw)
+            bOkd, sErrD = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtOrthoO, nil, 0, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
             if not bOkd then return bOkd, sErrD end
          end
       end
@@ -409,7 +409,7 @@ function ProcessScarfJoint.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
          else
             vtOrthoO = Vector3d( vtRef)
          end
-         local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[5] - 1, sCutting, dSawDiam, vtOrthoO, nil, BD.CUT_EXTRA, BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[5] - 1, sCutting, dSawDiam, vtOrthoO, nil, BD.CUT_EXTRA, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sNameOrErr end
       end
    end
diff --git a/LuaLibs/ProcessSimpleScarf.lua b/LuaLibs/ProcessSimpleScarf.lua
index 8a6115c..c48b23a 100644
--- a/LuaLibs/ProcessSimpleScarf.lua
+++ b/LuaLibs/ProcessSimpleScarf.lua
@@ -213,7 +213,7 @@ function ProcessSimpleScarf.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
       -- se va fatto, inserisco la lavorazione
       if bCut then
          local vtOrthoO = Vector3d( vtRef)
-         local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[1] - 1, sCutting, dSawDiam, vtOrthoO, nil, BD.CUT_EXTRA, BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[1] - 1, sCutting, dSawDiam, vtOrthoO, nil, BD.CUT_EXTRA, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sNameOrErr end
       end
    end
@@ -265,7 +265,7 @@ function ProcessSimpleScarf.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
          end
          -- lavoro la faccia
          for j = 1, #vCuts[i] do
-            local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO, nil, 0, BD.CUT_SIC, 0, 0, nil, b3Raw)
+            local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO, nil, 0, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
             if not bOk then
                return bOk, sErr
             end
@@ -277,7 +277,7 @@ function ProcessSimpleScarf.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
       if vFaceOrd[2] ~= 0 then
          -- inserisco la lavorazione
          local nOrthoOpposite = BL.GetNearestOrthoOpposite( vtRef)
-         local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[2] - 1, sCutting, dSawDiam, nOrthoOpposite, nil, 0, BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[2] - 1, sCutting, dSawDiam, nOrthoOpposite, nil, 0, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sNameOrErr end
          if #sNameOrErr > 0 then bIntCut = true end
       end
@@ -293,7 +293,7 @@ function ProcessSimpleScarf.Make( Proc, nPhase, nRawId, nPartId, dOvmHead)
             end
          end
          -- inserisco la lavorazione
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtRef2, nil, 0, BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtRef2, nil, 0, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sErr end
       end
    end
diff --git a/LuaLibs/ProcessSplit.lua b/LuaLibs/ProcessSplit.lua
index 971a29a..0225592 100644
--- a/LuaLibs/ProcessSplit.lua
+++ b/LuaLibs/ProcessSplit.lua
@@ -213,7 +213,7 @@ function ProcessSplit.Make( Proc, nPhase, nRawId, nPartId)
          for i = nCuts, 1, -1 do
             local dCutOffset = ( i - 1) * dOffsL
             local sNotes = EgtIf( bSplit, 'Presplit;', 'Precut;')
-            local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting, dSawDiam, MCH_MILL_FU.ORTHO_FRONT, nil, dCutExtra, BD.CUT_SIC, dCutOffset, dAccStart, sNotes, b3Raw)
+            local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting, dSawDiam, MCH_MILL_FU.ORTHO_FRONT, nil, dCutExtra, BD.CUT_SIC, dCutOffset, dAccStart, 0, sNotes, b3Raw)
             if not bOk then return false, sErr end
          end
       end
@@ -226,7 +226,7 @@ function ProcessSplit.Make( Proc, nPhase, nRawId, nPartId)
          else
             sNotes = EgtIf( i == 1, 'Cut;', 'Precut;')
          end
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting, dSawDiam, nOrthoOpposite, nil, dCutExtra, BD.CUT_SIC, dCutOffset, dAccStart, sNotes, b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting, dSawDiam, nOrthoOpposite, nil, dCutExtra, BD.CUT_SIC, dCutOffset, dAccStart, 0, sNotes, b3Raw)
          if not bOk then return false, sErr end
       end
    -- altrimenti necessari tagli da sopra e sotto con testa opportuna
@@ -270,7 +270,7 @@ function ProcessSplit.Make( Proc, nPhase, nRawId, nPartId)
       for i = nCuts, 1, -1 do
          local dCutOffset = ( i - 1) * dOffsL
          local sNotes = EgtIf( bSplit, 'Presplit;', 'Precut;')
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting2, dSawDiam2, MCH_MILL_FU.ORTHO_TOP, nil, dCutExtra2, BD.CUT_SIC, dCutOffset, dAccStart, sNotes, b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting2, dSawDiam2, MCH_MILL_FU.ORTHO_TOP, nil, dCutExtra2, BD.CUT_SIC, dCutOffset, dAccStart, 0, sNotes, b3Raw)
          if not bOk then return false, sErr end
       end
       -- eseguo i tagli necessari
@@ -282,7 +282,7 @@ function ProcessSplit.Make( Proc, nPhase, nRawId, nPartId)
          else
             sNotes = EgtIf( i == 1, 'Cut;', 'Precut;')
          end
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting, dSawDiam, MCH_MILL_FU.ORTHO_DOWN, nil, dCutExtra, BD.CUT_SIC, dCutOffset, dAccStart, sNotes, b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, 0, sCutting, dSawDiam, MCH_MILL_FU.ORTHO_DOWN, nil, dCutExtra, BD.CUT_SIC, dCutOffset, dAccStart, 0, sNotes, b3Raw)
          if not bOk then return false, sErr end
       end
    end
diff --git a/LuaLibs/ProcessStepJoint.lua b/LuaLibs/ProcessStepJoint.lua
index 1116579..e04971b 100644
--- a/LuaLibs/ProcessStepJoint.lua
+++ b/LuaLibs/ProcessStepJoint.lua
@@ -266,7 +266,7 @@ local function MakeTwoFaces( Proc, nPhase, nRawId, nPartId, dOvmHead)
             -- lavoro la faccia
             for j = 1, #vCuts[i] do
                local dLocCutExtra = EgtIf( j == #vCuts[i], dCutExtra - dExtraUp, dCutExtra)
-               local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthO, nil, dLocCutExtra, BD.CUT_SIC, 0, 0, nil, b3Raw)
+               local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthO, nil, dLocCutExtra, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
                if not bOk then
                   return bOk, sErr
                end
@@ -421,7 +421,7 @@ local function MakeThreeFaces( Proc, nPhase, nRawId, nPartId, dOvmHead)
          -- lavoro la faccia
          for j = 1, #vCuts[i] do
             local dLocCutExtra = EgtIf( j == #vCuts[i], dCutExtra - dExtraUp, dCutExtra)
-            local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthO, nil, dLocCutExtra, BD.CUT_SIC, 0, 0, nil, b3Raw)
+            local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthO, nil, dLocCutExtra, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
             if not bOk then
                return bOk, sErr
             end
diff --git a/LuaLibs/ProcessStepJointNotch.lua b/LuaLibs/ProcessStepJointNotch.lua
index ac18721..7a4ce7e 100644
--- a/LuaLibs/ProcessStepJointNotch.lua
+++ b/LuaLibs/ProcessStepJointNotch.lua
@@ -114,7 +114,7 @@ local function MachineByBlade( Proc, nPhase, nRawId, nPartId, dOvmHead, b3Solid,
          -- lavoro la faccia
          for j = 1, #vCuts[i] do
             local dLocCutExtra = EgtIf( j == #vCuts[i], dCutExtra - dExtraUp, dCutExtra)
-            local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, nOrthoOpposite, nil, dLocCutExtra, BD.CUT_SIC, 0, 0, nil, b3Raw)
+            local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, nOrthoOpposite, nil, dLocCutExtra, BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
             if not bOk then
                return bOk, sErr
             end
diff --git a/LuaLibs/ProcessTyroleanDovetail.lua b/LuaLibs/ProcessTyroleanDovetail.lua
index f1a413d..a24a12f 100644
--- a/LuaLibs/ProcessTyroleanDovetail.lua
+++ b/LuaLibs/ProcessTyroleanDovetail.lua
@@ -300,7 +300,7 @@ local function MakeMachByBlade( Proc, nPhase, nRawId, nPartId, dOvmHead, b3Raw,
             else
                dExtraTrim = dMiddleExtraTrim
             end
-            local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO, nil, -(dTrim+dExtraTrim), BD.CUT_SIC, 0, 0, nil, b3Raw)
+            local bOk, sErr = BL.MakeOneFaceBySaw( vCuts[i][j], 0, sCutting, dSawDiam, vtOrthoO, nil, -(dTrim+dExtraTrim), BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
             if not bOk then
                return bOk, sErr
             end
@@ -339,7 +339,7 @@ local function MakeMachByBlade( Proc, nPhase, nRawId, nPartId, dOvmHead, b3Raw,
       if vFaceOrd[2] ~= 0 then
          -- inserisco la lavorazione
          local nOrthoOpposite = BL.GetNearestOrthoOpposite( vtRef)
-         local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[2] - 1, sCutting, dSawDiam, nOrthoOpposite, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[2] - 1, sCutting, dSawDiam, nOrthoOpposite, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sNameOrErr end
          if #sNameOrErr > 0 then bIntCut = true end
       end
@@ -355,7 +355,7 @@ local function MakeMachByBlade( Proc, nPhase, nRawId, nPartId, dOvmHead, b3Raw,
             end
          end
          -- inserisco la lavorazione
-         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtRef2, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sErr = BL.MakeOneFaceBySaw( Proc.Id, vFaceOrd[3] - 1, sCutting, dSawDiam, vtRef2, nil, -(dTrim + dFinalExtraTrim), BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sErr end
       end
    end
@@ -566,7 +566,7 @@ local function MakeMachByMill( Proc, nPhase, nRawId, nPartId, dOvmHead, b3Raw, b
          end
          -- inserisco la lavorazione
          local nOrthoOpposite = BL.GetNearestOrthoOpposite( vtRef)
-         local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, (i-1), sCutting, dSawDiam, nOrthoOpposite, nil, -(dTrim + 1), BD.CUT_SIC, 0, 0, nil, b3Raw)
+         local bOk, sNameOrErr = BL.MakeOneFaceBySaw( Proc.Id, (i-1), sCutting, dSawDiam, nOrthoOpposite, nil, -(dTrim + 1), BD.CUT_SIC, 0, 0, 0, nil, b3Raw)
          if not bOk then return bOk, sNameOrErr end
       end
    end