; PIndex = Type, PName, Default, Description
; Type : d=double, l=length, s=string

[1]
Name=Offsets
1=d,TIPO_CN,2,0=AXIUM 2=FLEXIUM
2=l,X1_NEG,-2730.0,MIN_X1
3=l,X1_POS,-650.0,MAX_X1
4=l,PARK_X1,-2730.0,PARK_X1
5=l,Z1_NEG,-1570.0,MIN_Z1
6=l,Z1_POS,-20,MAX_Z1
7=l,PARK_Z1,-535.0,PARK_Z1
8=l,PARK_SAWZ1,-150.0,---
9=d,C1_NEG,-275,MIN_C1
10=d,C1_POS,275,MAX_C1
11=d,B1_NEG,-127,MIN_B1
12=d,B1_POS,127,MAX_B1
13=d,B1_NEG1,-119,MIN_B1_SAW
14=d,B1_POS1,119,MAX_B1_SAW
15=l,PIVOT_T1,170.0,PIVOT_HEAD1
16=l,X2_NEG,-2080.0,MIN_X2
17=l,X2_POS,0.0,MAX_X2
18=l,PARK_X2,0.0,PARK_X2
19=l,Z2_NEG,-1550.0,MIN_Z2
20=l,Z2_POS,-20,MAX_Z2
21=l,PARK_Z2,-535.0,PARK_Z2
22=l,PARK_SAWZ2,-150.0,---
23=d,C2_NEG,-275,MIN_C2
24=d,C2_POS,275,MAX_C2
25=d,B2_NEG,-127,MIN_B2
26=d,B2_POS,127,MAX_B2
27=d,B2_NEG1,-119,MIN_B2_SAW
28=d,B2_POS1,119,MAX_B2_SAW
29=l,PIVOT_T2,170.0,PIVOT_HEAD2
30=l,MIN_Y1,295,MIN_Y1
31=l,MAX_Y1,5712,MAX_Y1
32=l,PARK_Y1,967,PARK_Y1
33=l,MIN_V1,0.0,MIN_V1
34=l,MAX_V1,679.0,MAX_V1
35=l,MIN_Y2,-5719,MIN_Y2
36=l,MAX_Y2,-295,MAX_Y2
37=l,PARK_Y2,-974,PARK_Y2
38=l,MIN_V2,-679.0,MIN_V2
39=l,MAX_V2,0.0,MAX_V2
40=l,MIN_DELTAVY,295,MIN_DELTA_VY
41=d,CLAMP5,0,SMALL_CLAMP
42=l,MINWOPEN,38,MIN_OPEN_SMALL_CLAMP
43=l,MAXWOPEN,160,MAX_OPEN_SMALL_CLAMP
44=l,MAXWHEIGHT,305,MAX_BEAM_HEIGHT_ON_SMALL_CLAMP
45=l,DIST_FTZERO,2144.4,DIST_LASER
46=l,DELTA_CARICZERO,40.0,DELTA_LASER_LOAD
47=l,DIST_UNLOAD,-2300,DIST_UNLOAD
48=l,OFFSETXT1,-1555.3,OFFSETX_HEAD1
49=l,OFFSETZT1,-1054.4,OFFSETZ_HEAD1
50=l,OFFSETXT2,-1552.7,OFFSETX_HEAD2
51=l,OFFSETZT2,-1051.3,OFFSETZ_HEAD2
52=l,OFFSETZSOTTOTRAVE,981,DELTAZ_RULLI_SOTTOTRAVE
53=l,OFFSETZTAPPETO,485,DELTAZ_RULLI_TAPPETO
54=d,OFFSETCLAMAT1,0,OFFSETCLAMA_HEAD1
55=d,OFFSETBLAMAT1,0,OFFSETBLAMA_HEAD1
56=d,OFFSETCLAMAT2,0,OFFSETCLAMA_HEAD2
57=d,OFFSETBLAMAT2,0,OFFSETBLAMA_HEAD2
58=d,SECONDSAW,1,SECOND_SAW
59=d,MORTISER,0,MORTISER
60=d,DOUBLE_HEAD_DOVETAIL,1,DT_MORTISE_IN_DOUBLE
61=d,DOUBLE_HEAD_MORTISE,1,MORTISE_IN_DOUBLE
62=d,DOUBLE_HEAD_DRILLING,1,DRILLING_IN_DOUBLE

[2]
Name=Trave
1=l,XMIN,50,XMIN
2=l,XMAX,401,XMAX
3=l,ZMIN,50,ZMIN
4=l,ZMAX,801,ZMAX

[3]
Name=User
1=d,OPTIMIZATIONS_ENABLE_SLICES_F5,1,ENABLE_SLICES_ON_END
2=d,OPTIMIZATIONS_ENABLE_SLICES_F6,1,ENABLE_SLICES_ON_START
3=d,OPTIMIZATIONS_LENGTH_SLICES,100,SLICES_LENGTH
4=l,L020_DIAM_HOLE,20,L020_HOLE_DIAM
5=l,L040_OFFSET_P1,0,L040_ON_TENON_OFFSET