- in BeamDataNew rimossi parametri mlde non necessari; aggiunte funzioni per calcolo RestrictedLength (al momento è MinJoin + extra) e grezzo minimo scaricabile

Beam/BeamDataNew.lua

@@ -46,16 +46,12 @@ local BeamData = {
 
 -- costanti riportate da mlde non necessarie per automatismo (sostituire con GetParameters o simile)
 local MldeParameters = {}
-MldeParameters.NumericalControl = 'TPA'                                      -- NUM o TPA o NUM_PLUS
-MldeParameters.MinX = 0
-MldeParameters.MaxX = 1350
-MldeParameters.MinZ = -1350
-MldeParameters.MaxZ = 0
 MldeParameters.MillOffs = 177.35
-MldeParameters.SawOffs = -242.68
-MldeParameters.DeltaTabY = 898.0
-MldeParameters.DeltaTabZ = -1017.8 + MldeParameters.MillOffs                 -- per TPA : -1013.3 + MillOffs    -- per NUM : -838.4
-MldeParameters.NewTopC = true
+MldeParameters.MinJoinVV = 75
+MldeParameters.MinJoinSS = 100
+MldeParameters.MinJoinLS = 290
+MldeParameters.MinJoinSL = 100
+MldeParameters.MinJoinLL = 400
 
 -- Aggiornamento con dati macchina personalizzati
 -- TODO sostituire con GetParameters o simile
@@ -71,22 +67,6 @@ if EgtExistsFile( sData) then
    local Machine = dofile( sData)
    if Machine then
       if Machine.Offsets then
-         if Machine.Offsets.TIPO_CN == 0 then
-            MldeParameters.NumericalControl =  'NUM'
-         elseif Machine.Offsets.TIPO_CN == 2 then
-            MldeParameters.NumericalControl =  'NUM_PLUS'
-         else
-            MldeParameters.NumericalControl = 'TPA'
-         end
-         if Machine.Offsets.MAX_X then MldeParameters.MinX = - Machine.Offsets.MAX_X end
-         if Machine.Offsets.MIN_X then MldeParameters.MaxX = - Machine.Offsets.MIN_X end
-         if Machine.Offsets.MIN_Z then MldeParameters.MinZ = Machine.Offsets.MIN_Z end
-         if Machine.Offsets.MAX_Z then MldeParameters.MaxZ = Machine.Offsets.MAX_Z end
-         if Machine.Offsets.PIVOTFRESA then MldeParameters.MillOffs = - Machine.Offsets.PIVOTFRESA end
-         if Machine.Offsets.PIVOTLAMA then MldeParameters.SawOffs = - Machine.Offsets.PIVOTLAMA end
-         if Machine.Offsets.OFFSETX then MldeParameters.DeltaTabY = - Machine.Offsets.OFFSETX end
-         if Machine.Offsets.OFFSETZ then MldeParameters.DeltaTabZ = Machine.Offsets.OFFSETZ + EgtIf( MldeParameters.NumericalControl == 'TPA', MldeParameters.MillOffs, 0) end
-         if Machine.Offsets.NEWTOPC then MldeParameters.NewTopC = ( Machine.Offsets.NEWTOPC == 1) end
          BeamData.MINRAW_S = max( BeamData.MINRAW_S, Machine.Offsets.MINRAW_S or BeamData.MINRAW_S)
          BeamData.MINRAW_L = max( BeamData.MINRAW_L, Machine.Offsets.MINRAW_L or BeamData.MINRAW_L)
          BeamData.CUT_EXTRA = Machine.Offsets.CUT_EXTRA or BeamData.CUT_EXTRA
@@ -98,9 +78,15 @@ if EgtExistsFile( sData) then
          BeamData.LEN_SHORT_PART = Machine.Offsets.LEN_SHORT_PART or BeamData.LEN_SHORT_PART
          BeamData.MAX_HEIGHT2 = Machine.Offsets.MAX_HEIGHT2 or BeamData.MAX_HEIGHT2
          BeamData.OVM_MID = Machine.Offsets.OVM_MID or BeamData.OVM_MID
+         if Machine.Offsets.PIVOTFRESA then MldeParameters.MillOffs = - Machine.Offsets.PIVOTFRESA end
          if Machine.Offsets.ROT90 ~= nil then BeamData.ROT90 = ( Machine.Offsets.ROT90 == 1) end
          if Machine.Offsets.ROT180 ~= nil then BeamData.ROT180 = ( Machine.Offsets.ROT180 == 1) end
          if Machine.Offsets.CUT_SIC then BeamData.CUT_SIC = EgtClamp( Machine.Offsets.CUT_SIC, 15, 50) end
+         if Machine.Offsets.MIN_JOIN_VV then MldeParameters.MinJoinVV = EgtClamp( Machine.Offsets.MIN_JOIN_VV, 60, 150) end
+         if Machine.Offsets.MIN_JOIN_SS then MldeParameters.MinJoinSS = EgtClamp( Machine.Offsets.MIN_JOIN_SS, 80, 275) end
+         if Machine.Offsets.MIN_JOIN_LS then MldeParameters.MinJoinLS = EgtClamp( Machine.Offsets.MIN_JOIN_LS, 250, 400) end
+         if Machine.Offsets.MIN_JOIN_SL then MldeParameters.MinJoinSL = EgtClamp( Machine.Offsets.MIN_JOIN_SL, 80, 400) end
+         if Machine.Offsets.MIN_JOIN_LL then MldeParameters.MinJoinLL = EgtClamp( Machine.Offsets.MIN_JOIN_LL, 300, 600) end
       end
       if Machine.Trave then
          BeamData.MIN_WIDTH = Machine.Trave.XMIN or BeamData.MIN_WIDTH
@@ -114,6 +100,90 @@ if EgtExistsFile( sData) then
    end
 end
 
+---------------------------------------------------------------------
+local function GetSectionCoeff( dW, dH, dL)
+   local SEZ_L = 80000
+   local SEZ_S = 20000
+   local LEN_SMALL = 2000
+   local dSez = dW * dH
+   if dSez <= SEZ_S then
+      return 0.0
+   elseif dSez < SEZ_L  then
+      if dL and dL < LEN_SMALL then dSez = max( 0.6 * dSez, SEZ_S) end
+      local dCoeff = ( dSez - SEZ_S) / ( SEZ_L - SEZ_S)
+      return dCoeff
+   else
+      return 1.0
+   end
+end
+
+---------------------------------------------------------------------
+-- TODO questa è copiata (e migliorata) da mlde, va unificata
+-- TODO vedere se servono anche dDeltaTol e dMinOther
+local function GetMinJoin( dW, dH, dL)
+
+   -- funzione di supporto per interpolazione lineare
+   local function MapRange( x, x1, x2, y1, y2)
+      if x <= x1 then return y1 end
+      if x >= x2 then return y2 end
+      return y1 + ( y2 - y1) * ( ( x - x1) / ( x2 - x1))
+   end
+
+   -- costanti geometriche e tolleranze
+   local L_SMALL = 800
+   local H_V, H_S, H_L = 90, 200, 400
+   local W_V, W_S, W_L = 90, 150, 250
+
+   local DELTA_TOL_S = 210
+   local DELTA_TOL_V = 110
+   local DELTA_TOL_L = 410
+
+   local dMinJoin, dDeltaTol
+
+   if dW <= W_V and dH <= H_V then
+      dMinJoin  = MldeParameters.MinJoinVV
+      dDeltaTol = DELTA_TOL_V
+   elseif dL <= L_SMALL then
+      dMinJoin  = MldeParameters.MinJoinSS
+      dDeltaTol = DELTA_TOL_S
+   else
+      -- 1. Interpolazione sulla larghezza partendo da valori macchina
+      local dMinJoinS = MapRange( dW, W_S, W_L, MldeParameters.MinJoinSS, MldeParameters.MinJoinSL)
+      local dMinJoinL = MapRange( dW, W_S, W_L, MldeParameters.MinJoinLS, MldeParameters.MinJoinLL)
+
+      -- 2. Interpolazione sull'altezza partendo dai valori interpolati sulla larghezza
+      dMinJoin  = MapRange( dH, H_S, H_L, dMinJoinS, dMinJoinL)
+      dDeltaTol = MapRange( dH, H_S, H_L, DELTA_TOL_S, DELTA_TOL_L)
+
+      if dW < W_V then
+         dDeltaTol = DELTA_TOL_V
+      end
+   end
+
+   --local dMinOther = abs( MldeParameters.MinY) + abs( MldeParameters.MaxV) + dMinJoin
+
+   return dMinJoin
+end
+BeamData.GetMinJoin = GetMinJoin
+
+---------------------------------------------------------------------
+local function GetRestrictedLength( dW, dH, dL)
+   local dMinJoin = GetMinJoin( dW, dH, dL)
+   local dExtra = 50
+
+   local dRestrictedLength = dMinJoin + dExtra
+
+   return dRestrictedLength
+end
+BeamData.GetRestrictedLength = GetRestrictedLength
+
+---------------------------------------------------------------------
+local function GetMinUnloadableRaw( dW, dH)
+   local dCoeff = GetSectionCoeff( dW, dH)
+   return ( 1 - dCoeff) * BeamData.MINRAW_S + dCoeff * BeamData.MINRAW_L
+end
+BeamData.GetMinUnloadableRaw = GetMinUnloadableRaw
+
 ---------------------------------------------------------------------
 local function GetBlockedAxis( sHead, nToolType, sBlockedAxis)
    -- lama
@@ -175,87 +245,6 @@ local function GetSCC( vtToolDirection, vtEdgeDirection, vtNFace)
    return nSCC
 end
 
----------------------------------------------------------------------
--- sAxis può essere AB, C, Z; restituisce direzioni, profondità di estrusione e punti per il controllo precollisione
-local function GetPreCollisionData( sAxis, vtC, vtHead)
-
-   local PreCollisionData = {}
-
-   -- Pivot uguale per tutti; non c'è aggregato quindi non dipende da SCC
-   -- riferimento vtPivot
---    - vtHead (Z): asse rotazione utensile, guarda il mandrino
---    - vtToolSCC (X): direzione asse C o aggregato
---    - vtEdge (Y): direzione lato, verso in base a X e Z
---    - punto di applicazione: naso mandrino o aggregato
-   PreCollisionData.vtMovePivot = Vector3d( 0, 0, -MldeParameters.SawOffs)
-
-   -- carro Z
-   if sAxis == 'Z' then
-
-      PreCollisionData.Directions = { vtDirectionX = X_AX(), vtDirectionY = Z_AX(), vtDirectionZ = -Y_AX()}
-      PreCollisionData.bSurfTmByRevolve = true
-      PreCollisionData.Points = {
-         Point3d( 0, 523, 0),
-         Point3d( 109.556, 523, 0),
-         Point3d( 109.556, 583, 0),
-         Point3d( 143.113, 583, 0),
-         Point3d( 143.113, 2533, 0),
-         Point3d( 0, 2533, 0)
-      }
-
-   -- motore (asse A o B)
-   elseif sAxis == 'AB' then
-
-      PreCollisionData.Directions = { vtDirectionX = vtC, vtDirectionY = -vtHead, vtDirectionZ = vtC ^ -vtHead}
-      PreCollisionData.dExtrusionDepth = 180
-      PreCollisionData.Points = {
-         Point3d( 100,-122,0),
-         Point3d( 100, -232.5, 0),
-         Point3d( -90, -232.5, 0),
-         Point3d( -90, 204.505, 0),
-         Point3d( -77.5, 216.55, 0),
-         Point3d( -89, 234.05, 0),
-         Point3d( -89, 242.55, 0),
-         Point3d( 89, 242.55, 0),
-         Point3d( 89, 234.05, 0),
-         Point3d( 77.5, 216.55, 0),
-         Point3d( 90, 204.505, 0),
-         Point3d( 90, 93, 0),
-         Point3d( 125, 93, 0),
-         Point3d( 125, -122, 0),
-         Point3d( 100, -122, 0)
-      }
-
-   -- asse C
-   elseif sAxis == 'C' then
-
-      PreCollisionData.Directions = { vtDirectionX = vtC, vtDirectionY = Z_AX(), vtDirectionZ = vtC ^ Z_AX()}
-      PreCollisionData.dExtrusionDepth = 200
-      PreCollisionData.Points = {
-         Point3d( 125, -92.752, 0),
-         Point3d( 203.5, -92.752, 0),
-         Point3d( 203.5, -100, 0),
-         Point3d( 400, -100, 0),
-         Point3d( 450, -50, 0),
-         Point3d( 450, 400, 0),
-         Point3d( 360, 490, 0),
-         Point3d( 170, 490, 0),
-         Point3d( 170, 523, 0),
-         Point3d( EgtIf( MldeParameters.NewTopC, -110, -175), 523, 0),
-         Point3d( EgtIf( MldeParameters.NewTopC, -110, -175), 400, 0),
-         Point3d( 230.858, 400, 0),
-         Point3d( 325, 305.858, 0),
-         Point3d( 325, 146, 0),
-         Point3d( 203.5, 146, 0),
-         Point3d( 203.5, 93, 0),
-         Point3d( 125, 93, 0),
-         Point3d( 125, -92.752, 0)
-      }
-   end
-
-   return PreCollisionData
-end
-
 ---------------------------------------------------------------------
 local function GetSetupInfo( sHead)
    local SetupInfo = {}
@@ -265,21 +254,18 @@ local function GetSetupInfo( sHead)
    SetupInfo.dCAxisEncumbrance = 180
    SetupInfo.dCAxisSideEncumbrance = 200
    SetupInfo.bToolOnAggregate = false
-   SetupInfo.vtRotationAxisC = EgtGetAxisDir( 'C')
-   SetupInfo.vtRotationAxisAB = EgtGetAxisDir( 'B')
 
    -- testa 5 assi da sopra
    if sHead == 'H1' then
       SetupInfo.HeadType = { bTop = true, bBottom = false}
       SetupInfo.PreferredSide = {}
       SetupInfo.dPivot = MldeParameters.MillOffs -- per uscita fresa, diverso da uscita lama
-      SetupInfo.GetMinNz = function() return sin( -45) end
+      SetupInfo.GetMinNz = function() return sin( -25) end
    -- lama su testa 5 assi da sopra
    elseif sHead == 'H2' then
       SetupInfo.HeadType = { bTop = true, bBottom = false}
       SetupInfo.PreferredSide = {}
       SetupInfo.GetMinNz = function() return sin( -45) end
-      SetupInfo.GetPreCollisionData = GetPreCollisionData
       SetupInfo.GetSCC = GetSCC
    -- motosega
    elseif sHead == 'H3' then

Compile.bat

@@ -25,11 +25,11 @@ REM copio i sorgenti nel percorso temporaneo per i compilati
 ROBOCOPY . %fullPathSource%\bin\%machineName%\ /E /XF "Compile.bat" /XF ".gitignore" /XD ".git" /XF "UpdateLog.txt"
 
 REM copio i file compilati nel percorso temporaneo per i compilati
-\EgtProg\Dll32\luac54 -o %fullPathSource%\bin\%machineName%\Common-FAST.mlpe     		 	          -s Common-FAST.mlpe
-\EgtProg\Dll32\luac54 -o %fullPathSource%\bin\%machineName%\Common-FAST.mlse                        -s Common-FAST.mlse
-\EgtProg\Dll32\luac54 -o %fullPathSource%\bin\%machineName%\Common-FAST.NUM.mlpe                    -s Common-FAST.NUM.mlpe
-\EgtProg\Dll32\luac54 -o %fullPathSource%\bin\%machineName%\Common-FAST.NUM_PLUS.mlpe               -s Common-FAST.NUM_PLUS.mlpe
-\EgtProg\Dll32\luac54 -o %fullPathSource%\bin\%machineName%\Common-FAST.TPA.mlpe                    -s Common-FAST.TPA.mlpe
+\EgtProg\Dll32\luac54 -o %fullPathSource%\bin\%machineName%\Common_FAST.mlpe     		 	          -s Common_FAST.mlpe
+\EgtProg\Dll32\luac54 -o %fullPathSource%\bin\%machineName%\Common_FAST.mlse                        -s Common_FAST.mlse
+\EgtProg\Dll32\luac54 -o %fullPathSource%\bin\%machineName%\Common_FAST.NUM.mlpe                    -s Common_FAST.NUM.mlpe
+\EgtProg\Dll32\luac54 -o %fullPathSource%\bin\%machineName%\Common_FAST.NUM_PLUS.mlpe               -s Common_FAST.NUM_PLUS.mlpe
+\EgtProg\Dll32\luac54 -o %fullPathSource%\bin\%machineName%\Common_FAST.TPA.mlpe                    -s Common_FAST.TPA.mlpe
 
 REM comprimo i file compilati in uno zip pronto per essere distribuito
 tar.exe acvf %fullPathZip%\%machineName%.zip -C %fullPathSource%\bin\ %machineName%\*.*